Locosys RTK-M300

Locosys RTM-M300 L1/L5 RTK GNSS base station
  • The LOCOSYS RTK-M300, is a compact, rugged, and industrial grade computer with Intel Atom® x5-E3930 processor dual core 1.3GHz (boost up to 1.8GHz), Aluminum top case with sheet metal, is designed for the harsh or need noiseless Ad-hoc network environment.

    LOCOSYS RTK-M300 has an advanced RTK (Real-time kinematic) receiver that supports global GPS/Glonass/Beidou/Galileo/QZSS satellites, L1+L5 Dual-frequency and multi-constellation RTK positioning solution. RTK-M300 adopts full frequency 4G-LTE communication board, Worldwide LTE, UMTS/HSPA+, and GSM/GPRS/EDGE coverage. It features 10/100/1000Mbps Ethernet data and voice connectivity. A user accessinle SIM socket allows the user to access SIM card conveniently. The RTK-M300 ships with Windows 10 (or Linux by request) operating system and with LOCOSYS's Firebird application software.  The Firebird app provides a user-friendly GUI for the management of an RTK base station or as a rover.

    Because of the fan-less compact design, certified (-30 ~ +70 degrees) high and low-temperature test, and (MIL-STD-810) military standard vibration test, provide fast and easy installation. It is especially for the RTK Base Station with limited room space to locate the computer system, but without compromising with its space to scarify its features. Whether as a RTK Base station or RTK Rover, it is very fast and convenient to use and install. RTK-M300 keeps the flexibility to meet different demands for telemetric monitor or surveying applications.

    Intel Atom® x5-E3930 processor dual-core 1.3GHz (boost up to 1.8GHz)
    1 x 204-pin DDR3L SO-DIMM socket support 1866MHz up to 8GB. (Default 4GB)
    CommunicationWorldwide 4G-LTE, UMTS/HSPA+, and GSM/GPRS/EDGE coverage

    • LTE TDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28
    • LTE TDD: B38/B39/B40/B41
    • WCDMA: B1/B2/B4/B5/B6/B8/B19
    • GSM: B2/B3/B5/B8
    FunctionLOCOSYS RTK Base Station or Rover
    I/O Interface-Front
    • 1 x Power button
    • 4 x LED indicators for Status (programmable), Storage.
    • 1 x System reset button
    • 2 x Type A USB 3.0 compliant host, supporting system boot up
    • 1 x DB-15 VGA
    • 1 x HDMI
    • 1 x SIM card socket
    I/O Interface-Rear
    • 1 x 9~36VDC input with Ignition and 20W typical power consumption.
    • 1 x RJ-45 with LEDs for 10/100/1000Mbps Ethernet
    • 1 x Audio-in,
    • 1 x Audio-out
    • 1 x DB9 COM port
    Expandable Storage
    • 1 x 2.5” SSD SATA 3.0
    • 1 x m-SATA
    Operating System
    • Windows 10
    • Linux (By request)
    Power ManagementSelectable boot-up & shut-down voltage for low power protection HW design ready for 8-level delay time on/off at user's self-configuration Power on/off ignition, software detectable Support S3, S4 suspend mode.
    • 185mm (W) x 120mm (D) x 45mm (H) (7.3" x 4.7" x 1.8")
    • 1 kg (2.20 lbs)
    ConstructionAluminum top case with sheet metal
    • -30°C to 70°C (w/ industrial SSD) with air flow
    • Storage temperatures: -40°C to 85°C
    • Relative humidity: 10% to 90% (non-condensing)
    • Vibration: Vibration (SSD): 2g @5~500 Hz
    • Operating: MIL-STD-810F
    • Storage: MIL-STD-810F, Method 514.5, Category 24, Integrity Test Shock (SSD):
    • Operating: MIL-STD-810F, Method 516.5, Procedure I, Trucks and semi-trailers=20g
    • Crash hazard: MIL-STD-810F, Method 516.5, Procedure V, Ground equipment=75g
    Power AdapterAC100-240V
    Standards Certifications

    • CE approval
    • FCC Class
    • AE13 mark

    Further Information: